DEWALT DCN210SN Brushless XR 18 Gauge Brad Nailer

DEWALT DCN210SN Brushless XR 18 Gauge Brad Nailer

The DEWALT DCN210SN 18V XR Brushless 18Ga Brad Nailer (Body Only) is an advanced, ultra-compact second-fix cordless solution engineered to provide pneumatic-like speed and productivity without the hassle of hoses, compressors, or gas canisters. Powered by an efficient brushless motor, this next-generation finish nailer drives straight 18-gauge brad nails ranging from 16mm (5/8") to 50mm (2") in length seamlessly into both softwoods and dense hardwoods. While it operates solely in sequential mode rather than bump fire, it boasts a rapid response with zero delay, capable of firing up to 5 nails per second when the trigger is pulled sequentially. Its remarkably compact 259mm (10.2") tool height allows carpentry professionals to manoeuvre effortlessly in tight, confined spaces like cabinetry corners or narrow decorative trim. Supplied as a bare unit, it provides the perfect addition to an existing DEWALT 18V XR battery kit.

• 1 x DEWALT DCN210SN 18V XR Brushless 18Ga Brad Nailer (Body Only)
• 3 x Non-Marring Protective Tips
• 1 x Integrated Belt Hook
• Supplied without a battery or Charger
• Number of Batteries Supplied: 0
• Voltage: 18v
• Type: Brushless

Rapid Sequential Firing: Delivers impressive productivity with an engineered motor system capable of driving up to 5 nails per second with zero delay when the trigger is pulled sequentially.
Single Sequential Actuation: Engineered for precision placement and safety without a bump-fire mode, allowing rapid-fire control through rapid trigger pulls.
Ultra-Compact 259mm (10.2") Chassis: Designed with an optimised, shortened tool height to maximise manoeuvrability inside restricted, tight workspaces.
Gas-Free Cordless Freedom: Eliminates the continuous overhead costs of gas cartridges and the workspace clutter of air hoses and loud compressors.
Tool-Free Depth Adjustment: Features a precision thumb wheel to adjust drive depths effortlessly, ensuring brad heads seat perfectly flush without marring the timber face.
Tool-Free Jam & Stall Release: Features a quick-access nose mechanism to clear unexpected fastener jams instantly, reducing on-site downtime.
Low Nail Indicator Lock-out: Outfitted with an intelligent LED alert system that flashes when the magazine drops below 15 brads, preventing dry firing and surface damage.

• Voltage Output: 18V
• Nail Gauge Format: 18 Gauge (Straight Profile)
• Minimum Fastener Length: 16mm
• Maximum Fastener Length: 50mm
• Magazine Loading Type: Rear-Load Strip
• Magazine Holding Capacity: 110 Brad Nails
• Motor Type: Carbon-Free Brushless
• Tool Height Profile: 259mm
• Bare Tool Net Weight: 2.3kg
• Part Number: DCN210SN-XJ