Titebond 4366 Speed Set Wood Glue Gallon Bottle

Titebond 4366 Speed Set Wood Glue 1 Gallon/ 3.78 Litre Bottle

Titebond Speed Set Wood Glue is an extremely fast-setting, high solids PVA adhesive. It provides exceptional gap filling properties developing a bond stronger than the wood itself. This product offers excellent sandability, unaffected by finishes, and increases productivity through its shorter clamp time with no increase in viscosity. Titebond Speed Set cleans up with water.

Features & Benefits

Extremely fast set – 15 minute clamp time
Excellent strength & durability
Visible under black light
Unaffected by finishes
Heat resistant – Sands easily
Easy water cleanup

Application Guidelines

Application Temperature: Above 59°F

Open Assembly Time: 2-4 minutes (70°F / 50% RH / 8% MC)

Total Assembly Time: 8-10 minutes (70°F / 50% RH / 8% MC)

Minimum Required Spread: Approximately 6 mils or 250 square feet per gallon

Required Clamping Pressure: Use only enough pressure to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods).

Method of Application: Any method can be used for spreading as long as Open and Total Assembly Times are met (see above).

Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.

Limitations: Titebond Speed Set Wood Glue is not intended for exterior use or where moisture is likely. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 59°F. Do not Freeze. Agitate adhesive monthly to reduce product settling. Adhesive is extremely fast setting. It is important to follow Assembly Time recommendations. Minimum clamp-time is 15 minutes. Longer clamp times may be beneficial. Read SDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.